2-canales-Mhouse-GTX4-TX4-receptor-12-24V-ACDC-NONC-43392Mhz-rolling-code
2-canales-Mhouse-GTX4-TX4-receptor-12-24V-ACDC-NONC-43392Mhz-rolling-code

2-canales Mhouse GTX4, TX4 receptor, 12-24V AC/DC, NO/NC 433.92Mhz rolling code

18,60 (as of 15 noviembre, 2018, 6:18 pm)

2-channel 12-24V AC/DC receiver!
Fully compatible with Mhouse GTX4, TX4 remotes!
High quality 433.92Mhz rolling code receiver!

Comprar

Categoría:

Descripción del producto


Indefinido 433.92Mhz rolling code 2-channel receiver that is fully compatible with Mhouse GTX4, TX4 remotes. The 2 channels of this receive allows you to operate 2 different garage gates and/or other electronics using your raro EcoStar RSC2, RSE2 remote.Parameters:• 433.92Mhz rolling code frequency•2-channel receiver•Memory: Up to 400 remotes!!///INSTRUCTIONS FOR PROGRAMMING RECEIVER: Learning new remotes–> Press “learn 1” or “learn 2” button – Learn LED will go on. Then press the button which you wish to learn on your remote deporte. Learn LED will start blinking and go off – This means that you have successfully learned your remote to the receiver. Repeat the above steps for other transmitters. Erasing receivers memory–> Press “learn 1” or “learn 2” and keep holding until Learn LED will go off – Merienda Learn LED is off, it means that you have successfully erased the memory of the appropriate channel. HOW TO CONNECT YOUR RECEIVER: Connect 2 wires of CH1 or CH2 to your deporte board between: 1) COM and N/O, 2) COM and P/P (Push button) in parallel to Push button. All you need to do is to connect this receiver to your deporte board by using only 4 wires (2 – for power; 2 – for relay!!!) Note: The abriviations of your board can be different, so follow your derrotero. VIDEO INSTRUCTIONS FOR PROGRAMMING RECEIVER:–> https://www.youtube.com/watch?v=LatTu3nG-mA&feature=youtu.be ///We are fully committed for 100% customer satisfaction. IF YOU HAVE ANY QUESTIONS ABOUT YOUR PURCHASE PLEASE CONTACT US!
2-channel 12-24V AC/DC receiver!
Fully compatible with Mhouse GTX4, TX4 remotes!
High quality 433.92Mhz rolling code receiver!
Memory up to 400 remotes!
Distance up to 100 meters!

Valoraciones

No hay valoraciones aún.

Sé el primero en valorar “2-canales Mhouse GTX4, TX4 receptor, 12-24V AC/DC, NO/NC 433.92Mhz rolling code”

Tu dirección de correo electrónico no será publicada. Los campos obligatorios están marcados con *